GAUER 10H-CTL SAFETY EDGER
This
10H Cut-To-Length bar edging and straightening system has been designed to
cover a wide gamut of requirements. It can produce edge finished bar from
slit coil and sheared plate eliminating the necessity of stocking hundreds
of different sizes.
SPECIFICATIONS:
-
Model: 10H-CTL
-
Width Range: 1 inch to 8 inches
-
Thickness Range:
1/8" to 1/2"
-
Material: All ferrous and non-ferrous metals with a
yield strength of 50,000 PSI or less
-
Speed: Up to 200 ft/min (variable speed)
-
Electrical: 230/460 Volts, 3 phase, 60 Hertz, 78
total horsepower
-
Length Accuracy: Within 1/16"
-
Edge Capability: Universal Mill Edge, Square Edge,
Modified Square, or other special forms subject to approval.
-
Dimensions: 7'0" long x 7'1" wide x 5'10" high
-
Weight: Approximately 13,500 lbs.
RELIABILITY
The 10H Machines have been designed and manufactured to incorporate the
highest quality components commercially available. All parts are
manufactured under stringent specifications and conservatively rated to
provide long life even under adverse conditions. Fittings and hydraulic
piping are carefully and thoroughly inspected before use. An oil to air heat
exchanger has been incorporated into the design for temperature control as
opposed to the more troublesome water systems. In all, the 10H Machines are
a less cumbersome, more efficient cut-to-length/bar and coil edge finishing
system than any equipment commercially available.
MAINTENANCE
Gauer's development of a totally hydraulic machine has given Gauer a
superb reputation for equipment that seems to be indestructible. The
hydraulic system filters are monitored and automatically provide indication
when filters need changing. The filters themselves are the easily changed
cartridge type and only need replacement after many hours of operation. The
use of a hydraulic drive system completely avoids the damaging stall torques
of other arrangements. This is important in preventing damage in the
inevitable cases of operator set up error.